Blow Molding Machine Energy‑High Speed Model
Characteristics
The servo motor is adopted to drive the molding mechanism, triggering off bottom bold linkage, the whole mechanism works speedy, accurately, stably and flexibly. and it is energy efficient and environmental safe.
The servo motor driven stepping system and stretching system have improved the speed, flexibility and accuracy of blowing.
The thermostatic heating system ensures that the heating temperature of each preform surface and internal is uniform. Hinged oven holders make it easy for the operators to change infrared tubes and do miantenance.
The simple slide in way of mold mounting makes it possible for the operators to change mold easly within 30 minutes.
The cooling system for the preform neck is equipped to ensure the preform neck does not deform during heating adn blowing.
The man-machine interface is automated and easy to operate. The compact machine occupies smaller area.
This series is used for making PET bottle for drinking water, carbonated soft drink, medium temperature filling drink, milk, edible oil, food, pharmacy, daily chemical.
Technical Parameter
| Model | Unit | M-9000 | M-6000 | M-7000 |
| No. of Cav | Cav | 6 | 4 | 4 |
| Output | BPH | 9000~10000 | 6000~7000 | 4800~6000 |
| Max contain Volume | L | 0.6 | 0.6 | 2 |
| Neck diameter range | mm | 18~38 | 18~38 | 18~38 |
| Max container height | mm | 240 | 240 | 320 |
| Max container diameter | mm | 70 | 70 | 108 |
| Cavity pitch | mm | 76 | 76 | 114 |
| Preform heating pitch | mm | 76 | 76 | 114 |
|
Power consumption |
kw | 45~55 | 30~40 | 45~55 |
| Rate power | kw | 98 | 98 | 122 |
| Blowing pressure | Mpa | 2.5~3.2 | 2.5~3.2 | 2.5~3.2 |
| Air consumption | M3/min | 6 | 4 | 4~8 |
| Size | mm | 5100*4900*3100 | 4400*4600*2800 | 5300*5000*3200 |
| Weight | kg | 5500 | 4500 | 5600 |
Advantages
- ✓High-speed stable production for beverage bottles
- ✓Excellent bottle forming quality
- ✓Strong production flexibility
- ✓Intelligent & easy operation
- ✓Energy saving & lower production cost
- ✓Seamless integration with beverage line
- ✓Safe & reliable structure
- ✓Low maintenance cost
After Sales Service
1. Installation and commissioning: We will arrange experienced technicians to carry out commissioning and trial production, and at the same time make the equipment reach the rated production capacity of the production line.
2. Training: Our company provides technical training for customers. The training content includes equipment structure and maintenance, equipment control and operation. After the training, the buyer’s technicians can master the operation and maintenance, can adjust the process and deal with various faults.
3. We can send you a video of the machine running. You are welcome to visit our factory and see the machine running. Third-party testing agencies are also accepted for inspection.
4. We can design the machine according to your requirements, and at the same time we will give you our professional advice, as you know, we have been in this industry for 25+ years.
5. Well-trained and experienced staff will answer all your inquiries in English and Chinese
6. 12-month warranty and lifetime technical support.
7. Provide good after-sales service, if you have any questions, please contact us. Provide after-sales service, if you have any questions, please contact us.
Installation Conditions
- Floor & FoundationThe floor must be flat, solid reinforced concrete with sufficient load-bearing capacity. Reserve adequate working clearance around the machine for mold replacement, maintenance and component overhaul. Keep the ground dry, dust-free and free from vibration interference
- Power SupplyConfirm voltage, phase, frequency and total available power capacity in advance. Stable power supply with proper grounding is required to protect electrical components.
- Compressed Air SystemEnough high-pressure compressed air (for blowing) and low-pressure instrument air shall be available, equipped with air filters and air dryer to ensure clean and dry air.
- Cooling WaterSufficient cooling water with stable pressure, temperature and water quality is required for mold cooling. Water pipeline, drain and chiller connection points need to be reserved.
- Ambient EnvironmentWorkshop temperature: 10–35℃; avoid direct sunlight and heat sources. Keep good ventilation. Low humidity is preferred for PET blow molding lines to prevent preform moisture absorption
- Other RequirementsReserve space for auxiliary equipment: chiller, air compressor, granulator, conveyor, material feeding system. Safe passage for forklift unloading and machine entry.
Frequently Asked Questions
Q1: What types of bottles can this blow machine produce?
It is specially designed for beverage industry. It can produce all kinds of PET plastic bottles for pure water, mineral water, fruit juice, carbonated drinks, dairy drinks etc. It supports round, square and custom-shaped bottles.
Q2: What is the production capacity of the machine?
The output depends on different models and cavity numbers. It ranges from low-speed 3000BPH to high-speed 24000BPH or higher. We customize the solution according to your daily production demand.
Q3: What bottle size range does it support?
It supports common beverage bottle sizes from 100ml to 2000ml, and can be customized for larger bottles up to 5L or 10L according to customer requirements.
Q4: Is the machine fully automatic or semi-automatic?
We provide fully automatic models. It realizes automatic preform feeding, heating, stretching, blowing and bottle discharging, requiring almost no manual operation
Q5: How is the bottle quality and reject rate?
Equipped with precise servo control and uniform infrared heating system. The finished bottles feature uniform wall thickness, high transparency and strong pressure resistance. The defective rate is controlled below 1% during normal operation
Q6: Is it easy to change molds for different bottle types?
Yes. The machine adopts quick mold change structure. It only takes a short time to replace molds and switch between different bottle sizes. Process parameters can be saved in the system for next-time quick use.
Q7: Can this machine connect with my existing beverage production line?
Yes, It can work inline with water treatment system, UHT sterilizer, filling machine, labeling machine and packaging machine to form a complete automatic beverage production line. It also supports standalone operation.
Q8: Is the machine energy-saving?
Yes,It adopts optimized infrared heating system and air recycling design, which effectively reduces power consumption. Compared with traditional blow machines, it saves 20%–30% energy cost for long-term production
Q9: What control system does the machine adopt?
Equipped with PLC intelligent control system and touch screen panel. It supports real-time parameter monitoring, automatic fault alarm, data recording and one-key operation, simple and stable.
Q10: How about daily maintenance?
The structure is reasonable with durable core parts. Daily maintenance only needs regular cleaning, lubrication and inspection of wearing parts. Low maintenance cost and long service life.
Q11: Can you provide CE certification?
Yes. The machine conforms to EU industrial standards, and CE certification can be provided for export clearance
Q12: What is your warranty policy?
12-month warranty for the whole machine (excluding wearing parts). We provide lifelong online technical support and remote guidance
Send Your Requirements
- What is your bottle usage? — Pure water, juice, carbonated drink, tea beverage, etc
- Bottle volume? — 100ml / 500ml / 1L / 2L or customized
- Bottle shape? — Round / Square / Special shape
- Required bottle weight and wall thickness standard —
- What is your required hourly output? (BPH) —
- Do you have fixed PET preform size and weight? —
- Fully automatic or semi-automatic blow molding machine? —
- Need servo energy-saving upgraded version or standard version? —
- Any workshop space limitation for machine installation? —
- Will the machine work standalone or connect inline with filling/sterilizing/labeling line? —
- Need CE certification for export? —
- Any special customization: mold reserve, safety cover, air recycling system, etc —
- Need on-site installation commissioning or only online guidance? —
Related Equipment
